Difference between revisions of ""first glimpse" series"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 20: Line 20:
 
* postprocessing
 
* postprocessing
  
 +
=[http:// openfoam.com/documentation/tutorial-guide/tutorialse7.php#x12-650003.1 Second simulation - Liquid-gas interaction]=
  
 +
In this second tutorial you will learn about the liquid-gas interaction in a multiphase flow. Here you will simulation a transient flow of two fluids separated by a sharp interface, or free surface. The focus here is on:
  
=[Second simulation - Liquid-gas interaction]=
+
* mesh generation
 
+
* boundary conditions
[http:// openfoam.com/documentation/tutorial-guide/tutorialse7.php#x12-650003.1]
+
* initial fields
 +
* fluid properties
 +
* time step control
 +
* discretisation schemes
 +
* solver control
 +
* running the simulation
 +
* postprocessing
  
  

Revision as of 07:52, 26 September 2016

Go back to Tutorials.

Installing OpenFOAM

In order to be able to complete the tutorials, you will have to install OpenFOAM. There are multiple ways to do this. First, follow the official guideline [http:// www.openfoam.com/download/installation.php here].

Alternatively, you can follow the video tutorial of Jozsef Nagy or the written tutorial of Joel Guerrero.

First simulation - Flow in an elbow

velocity magnitude of the elbow case at t=75s

In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:

  • basic case setup
  • initial values
  • boundary conditions
  • mesh
  • simulation (2D elbow case with three meshes)
  • postprocessing

[http:// openfoam.com/documentation/tutorial-guide/tutorialse7.php#x12-650003.1 Second simulation - Liquid-gas interaction]

In this second tutorial you will learn about the liquid-gas interaction in a multiphase flow. Here you will simulation a transient flow of two fluids separated by a sharp interface, or free surface. The focus here is on:

  • mesh generation
  • boundary conditions
  • initial fields
  • fluid properties
  • time step control
  • discretisation schemes
  • solver control
  • running the simulation
  • postprocessing


Third simulation - Vortex shedding

This is a more advanced simulation, where you can get a first idea, how to model the complex fluid dynamic phenomenon of vertex shedding behind a square cylinder. Find the pdf and the case files here.

  • Click on the link to the pdf
  • On slides 54-65 you will find a short description of the problem
  • Download the case from the link provided
  • Extract the file
  • Open a terminal by pressung ctrl+alt+t
  • If you extracted the file e.g. in Downloads change your working directory to the simulation case by entering into the terminal
cd Downloads/30x/advanced_physics/turbulence/squarecil/les
  • Follow the commands on slide 76 of the pdf

This simulation will run for a couple of hours depending on your hardware. We advice you to run it over night and check the results in the morning.