Difference between revisions of "BasicCaseStudies by Stefan Radl"
Jump to navigation
Jump to search
Stefan Radl (talk | contribs) |
Stefan Radl (talk | contribs) |
||
| Line 26: | Line 26: | ||
* [http://nbviewer.jupyter.org/github/sfo-project/2D-flow-over-flat-plate-laminar/blob/master/Open_Foam/README.ipynb 2D flow over a flat plate (laminar)]. The OpenFOAM case setup can be found on the corresponding [https://github.com/sfo-project/2D-flow-over-flat-plate-laminar/tree/master/Open_Foam GitHub page]. | * [http://nbviewer.jupyter.org/github/sfo-project/2D-flow-over-flat-plate-laminar/blob/master/Open_Foam/README.ipynb 2D flow over a flat plate (laminar)]. The OpenFOAM case setup can be found on the corresponding [https://github.com/sfo-project/2D-flow-over-flat-plate-laminar/tree/master/Open_Foam GitHub page]. | ||
| + | |||
| + | * [http://nbviewer.jupyter.org/github/sfo-project/2D-flow-over-rotating-cylinder-laminar/blob/master/Open_Foam/README.ipynb 2D flow over a rotating cylinder (laminar)]. The OpenFOAM case setup can be found on the corresponding [https://github.com/sfo-project/2D-flow-over-rotating-cylinder-laminar/tree/master/Open_Foam GitHub page]. | ||
Revision as of 14:59, 16 May 2017
- contributor: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: click here for email address
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 12.
These Jupyter notebook files below are part of the SFO Project. It will guide you throught the whole process of getting the simulation done.
2D Flow In a Backward Facing Step
The OpenFOAM case setup can be found on the corresponding GitHub page.
Flows In Pipes
- 2D-flow-in-rectangular-pipe-laminar. The OpenFOAM case setup can be found on the corresponding GitHub page.
- 3D-flow-in-circular-pipe-laminar. The OpenFOAM case setup is not yet available.
Flow over Obstacles
- 2D flow over a cylinder (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a cylinder (laminar, unsteady). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a flat plate (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a rotating cylinder (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
