Difference between revisions of "BasicCaseStudies by Stefan Radl"
Jump to navigation
Jump to search
Stefan Radl (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | [[category:basic tutorial]] | ||
* '''contributor''': Stefan Radl | * '''contributor''': Stefan Radl | ||
* '''affiliation''': Technische Universität Graz, Austria | * '''affiliation''': Technische Universität Graz, Austria | ||
Latest revision as of 05:55, 12 October 2017
- contributor: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: click here for email address
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 12.
These Jupyter notebook files below are part of the SFO Project. It will guide you throught the whole process of getting the simulation done.
2D Flow In a Backward Facing Step
The OpenFOAM case setup can be found on the corresponding GitHub page.
Flows In Pipes
- 2D-flow-in-rectangular-pipe-laminar. The OpenFOAM case setup can be found on the corresponding GitHub page.
- 3D-flow-in-circular-pipe-laminar. The OpenFOAM case setup is not yet available.
Flow over Obstacles
- 2D flow over a cylinder (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a cylinder (laminar, unsteady). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a flat plate (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
- 2D flow over a rotating cylinder (laminar). The OpenFOAM case setup can be found on the corresponding GitHub page.
