Difference between revisions of "Basic introduction by Hakan Nilsson"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) (Created page with "* '''contributor''': Håkan Nilsson * '''affiliation''': Department of Mechanics and Maritime Sciences, Chalmers University of Technology * '''contact''': <mail address='hakan...") |
Jozsef Nagy (talk | contribs) |
||
| Line 8: | Line 8: | ||
Go back to [https://wiki.openfoam.com/Collection_by_authors Collection by authors]. | Go back to [https://wiki.openfoam.com/Collection_by_authors Collection by authors]. | ||
| − | =[https://pingpong.chalmers.se/public/courseId/8331/lang-en/publicPage.do?item=3855237 | + | =[https://pingpong.chalmers.se/public/courseId/8331/lang-en/publicPage.do?item=3855237 Introduction to OpenFOAM by Håkan Nilsson]= |
The following pdfs will guide you through the first steps required for starting with OpenFOAM. This material was created for and during the PhD course in 2017 at Chalmers University of Technology. You will find information on: | The following pdfs will guide you through the first steps required for starting with OpenFOAM. This material was created for and during the PhD course in 2017 at Chalmers University of Technology. You will find information on: | ||
Revision as of 04:47, 5 September 2017
- contributor: Håkan Nilsson
- affiliation: Department of Mechanics and Maritime Sciences, Chalmers University of Technology
- contact: click here for email address
- OpenFOAM version: v1706+
- published under: CC BY-NC-SA license (creative commons licenses)
- origin: http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2017
Go back to Collection by authors.
Introduction to OpenFOAM by Håkan Nilsson
The following pdfs will guide you through the first steps required for starting with OpenFOAM. This material was created for and during the PhD course in 2017 at Chalmers University of Technology. You will find information on:
