Basics archive
Revision as of 05:31, 18 December 2020 by Jozsef Nagy (talk | contribs)
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Archive section.
Basics
- Introduction to OpenFOAM - Here you will find and introduction to OpenFOAM.
- Cavity case - The cavity case is one of the most basics tutorials. You will get a fast walkthrough with a good explanation about the mesh, running the case and postprocessing the results.
- Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
- Session A: Getting to know OpenFOAM - Here you can find a basic talk about OpenFOAM.
- Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.