Difference between revisions of "BlockMesh by Jozsef Nagy"
Jump to navigation
Jump to search
Andy Heather (talk | contribs) (Updated link) |
Andy Heather (talk | contribs) (Updated link) |
||
Line 3: | Line 3: | ||
* '''contact''': jozsef.nagy@jku.at | * '''contact''': jozsef.nagy@jku.at | ||
* '''OpenFOAM version''': 2.3.0 | * '''OpenFOAM version''': 2.3.0 | ||
− | * '''Published under''': CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses]) | + | * '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) |
Go back to [https://wiki.openfoam.com/index.php?title=Day_1 Day 1]. | Go back to [https://wiki.openfoam.com/index.php?title=Day_1 Day 1]. |
Revision as of 09:30, 20 September 2016
- author: Jozsef Nagy
- affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
- contact: jozsef.nagy@jku.at
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 1.
Dictionary definition for blockMesh
In this video you will get a detailed introduction into the dictionary describing the input of blockMesh. This time we will use a more detailed geometry of the forwardStep. You will learn about
- scaling the mesh
- setting the vertices
- setting volumes (blocks)
- setting edges
- boundaries
- grading
We will also run and post process the case, however the focus is on the meshing part of a CFD project.