Difference between revisions of "BlockMesh by Stefan Radl"

Latest revision as of 16:43, 22 February 2018

Go back to Day 1.

This is an old, unsupported page!

@@ Line 1: / Line 1: @@
-* '''author''': Stefan Radl
+[[category:meshing]]
+* '''contributor''': Stefan Radl
 * '''affiliation''': Technische Universität Graz, Austria
-* '''contact''': radl@tugraz.at
+* '''contact''': <mail address='radl@tugraz.at' description='author'>click here for email address</mail>
 * '''OpenFOAM version''': 1.7/3.0
 * '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses])
@@ Line 7: / Line 8: @@
 Go back to [https://wiki.openfoam.com/index.php?title=Day_1 Day 1].
-=[http://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 blockMesh with the cavity case]=
+This is an old, unsupported page!
-The cavity case is excellent for the introduction into the OpenFOAM internal simple meshing utility called blockMesh. You might have already run this case, but [http://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 this time] we will focus on
-* the dictionaries (e.g. blockMeshDict)
-* meshing the case
-* running and post processing the simulation.
-You might consider creating a copy of the cavity tutorial by typing e.g.
- >> cp -r cavity cavity_tutorial