Difference between revisions of "BlockMesh by Stefan Radl"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Andy Heather (talk | contribs) (Updated link) |
||
Line 7: | Line 7: | ||
Go back to [https://wiki.openfoam.com/index.php?title=Day_1 Day 1]. | Go back to [https://wiki.openfoam.com/index.php?title=Day_1 Day 1]. | ||
− | =[http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 blockMesh with the cavity case]= | + | =[http://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 blockMesh with the cavity case]= |
− | The cavity case is excellent for the introduction into the OpenFOAM internal simple meshing utility called blockMesh. You might have already run this case, but [http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 this time] we will focus on | + | The cavity case is excellent for the introduction into the OpenFOAM internal simple meshing utility called blockMesh. You might have already run this case, but [http://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 this time] we will focus on |
* the dictionaries (e.g. blockMeshDict) | * the dictionaries (e.g. blockMeshDict) | ||
* meshing the case | * meshing the case | ||
− | * running and | + | * running and post processing the simulation. |
You might consider creating a copy of the cavity tutorial by typing e.g. | You might consider creating a copy of the cavity tutorial by typing e.g. | ||
>> cp -r cavity cavity_tutorial | >> cp -r cavity cavity_tutorial |
Revision as of 09:28, 20 September 2016
- author: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: radl@tugraz.at
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses])
Go back to Day 1.
blockMesh with the cavity case
The cavity case is excellent for the introduction into the OpenFOAM internal simple meshing utility called blockMesh. You might have already run this case, but this time we will focus on
- the dictionaries (e.g. blockMeshDict)
- meshing the case
- running and post processing the simulation.
You might consider creating a copy of the cavity tutorial by typing e.g.
>> cp -r cavity cavity_tutorial