BlockMesh by Stefan Radl
Revision as of 07:24, 19 September 2016 by Jozsef Nagy (talk | contribs)
- author: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: radl@tugraz.at
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses])
Go back to Day 1.
[http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 blockMesh with the cavity case]
The cavity case is excellent for the introduction into the OpenFOAM internal simple meshing utility called blockMesh. You might have already run this case, but [http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_blockMeshIcoFoam.mp4 this time] we will focus on
- the dictionaries (e.g. blockMeshDict)
- meshing the case
- running and postprocessing the simulation.
You might consider creating a copy of the cavity tutorial by typing e.g.
>> cp -r cavity cavity_tutorial