Difference between revisions of "Collection by authors"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 11: | Line 11: | ||
* [https://wiki.openfoam.com/NACA0012_by_Michael_Alletto Transonic flow around a periodically pitching NACA0012 airfoil] | * [https://wiki.openfoam.com/NACA0012_by_Michael_Alletto Transonic flow around a periodically pitching NACA0012 airfoil] | ||
* [https://wiki.openfoam.com/1Dof_spring_mass_damper_system_by_Michael_Alletto One degree of freedom spring-mass-damper system without fluid forces] | * [https://wiki.openfoam.com/1Dof_spring_mass_damper_system_by_Michael_Alletto One degree of freedom spring-mass-damper system without fluid forces] | ||
| + | * [https://wiki.openfoam.com/Vortex_induced_vibration_of_a_2D_cylinder_by_Michael_Alletto 2D oscillating elastically mounted cylinder under the influence of fluid forces] | ||
=Isabelle Choquet and Håkan Nilsson= | =Isabelle Choquet and Håkan Nilsson= | ||
| Line 26: | Line 27: | ||
* [https://wiki.openfoam.com/Hysing_benchmark_by_Lionel_Gamet Hysing benchmark] | * [https://wiki.openfoam.com/Hysing_benchmark_by_Lionel_Gamet Hysing benchmark] | ||
| + | * [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet#Running_the_case Bubble rising in a spiralling path in a large tank] | ||
| + | * [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet The stationary droplet] | ||
=Joel Guerrero= | =Joel Guerrero= | ||
| Line 85: | Line 88: | ||
* [https://wiki.openfoam.com/Tips_by_Gerhard_Holzinger Tips] | * [https://wiki.openfoam.com/Tips_by_Gerhard_Holzinger Tips] | ||
| + | |||
| + | =Tobias Holzmann= | ||
| + | |||
| + | * [https://wiki.openfoam.com/Numerical_schemes_by_Tobias_Holzmann Numerical scheme analyzing] | ||
| + | * [https://wiki.openfoam.com/Suzanne_by_Tobias_Holzmann Drag coefficient of a monkey head - Suzanne] | ||
| + | * [https://wiki.openfoam.com/Simulation_project_of_an_exhaust_manifold_by_Tobias_Holzmann How To Build a complete OpenFOAM Project - Exhaust manifold ] | ||
| + | * [https://wiki.openfoam.com/Code_development_by_Tobias_Holzmann Code Development] | ||
| + | * [https://wiki.openfoam.com/Tutorials_by_Tobias_Holzmann Case collection] | ||
=Andras Horvath= | =Andras Horvath= | ||
Revision as of 05:49, 17 September 2020
This is a list of the contributions ordered alphabetically by the contributors.
Go back to Tutorials.
Contents
- 1 Michael Alletto
- 2 Isabelle Choquet and Håkan Nilsson
- 3 Luís Ferrás, Célio Fernandes and J.M. Nóbrega
- 4 Lionel Gamet
- 5 Joel Guerrero
- 6 Bahram Haddadi and Christian Jordan
- 7 Gerhard Holzinger
- 8 Tobias Holzmann
- 9 Andras Horvath
- 10 Kenneth Hoste and Hrvoje Jasak
- 11 Victoria Korchagova, Matvey Kraposhin and Sergei Strijhak
- 12 Matvey Kraposhin and Ilia Marchevsky
- 13 Robert Lee
- 14 József Nagy
- 15 József Nagy, Bahram Haddadi and Christian Jordan
- 16 Håkan Nilsson
- 17 Stefan Radl
- 18 Henrik Rusche
- 19 Bruno Santos et al.
- 20 Bruno Santos, Nelson Marques and Manoel Silvino Araújo
- 21 Gavin Tabor
- 22 Alexander Vakhrushev
Michael Alletto
- Settling sphere
- Settling Sphere Contact Angle
- 2D flapping wing
- Inline oscillating cylinder
- Transonic flow around a periodically pitching NACA0012 airfoil
- One degree of freedom spring-mass-damper system without fluid forces
- 2D oscillating elastically mounted cylinder under the influence of fluid forces
Isabelle Choquet and Håkan Nilsson
Luís Ferrás, Célio Fernandes and J.M. Nóbrega
Lionel Gamet
Joel Guerrero
- Advanced physics: Crash introduction to turbulence modeling
- Advanced physics: Crash introduction to multiphase flows
- Advanced physics: Crash introduction to compressible flows
- Programming - Implementing boundary condtions using codeStream
- Programming - Field initialization using codeStream
- Programming - Programming in OpenFOAM - Building blocks
- Programming - Creating a basic solver from scratch
- Programming - Modifying applications - Adding a passive scalar to icoFoam
- Programming - Implementing boundary condtions using OpenFOAM API (high-level programming)
- Tutorial 1: The driven cavity revisited
- Tutorial 2: Hagen Poiseuille flow
- Tutorial 3: 2D Circular cylinder - Vortex shedding
- Tutorial 4: 3D Square cylinder - Vortex shedding and turbulence modeling
- Tutorial 5: Hairpin vortices
- Tutorial 6: Multi-phase flows using the VOF method
- Tutorial 7: Supersonic flow past a wedge
- Tutorial 8: Supersonic flow past an expansion corner
- Tutorial 9: Sod's shock tube
- Tutorial 10: Automotive simulation - DrivAer model validation
Bahram Haddadi and Christian Jordan
- BlockMesh
- Discretization
- First Case
- First simulation
- Grid Convergence
- Multiphase (VOF)
- Parallelization
- Reacting flow
- Sampling
- SnappyHexMesh – Multi region
- SnappyHexMesh – Single region
- Steady-state turbulence modeling
- Tips
- T-junction
- Turbulence modeling
Gerhard Holzinger
Tobias Holzmann
- Numerical scheme analyzing
- Drag coefficient of a monkey head - Suzanne
- How To Build a complete OpenFOAM Project - Exhaust manifold
- Code Development
- Case collection
Andras Horvath
Kenneth Hoste and Hrvoje Jasak
- Finite_Volume_Discretization
- Introduction to OpenFOAM: A User View
- Multi-Phase and Free Surface Flows
- Programming
Victoria Korchagova, Matvey Kraposhin and Sergei Strijhak
Matvey Kraposhin and Ilia Marchevsky
Robert Lee
József Nagy
- Installing OpenFOAM in Windows 10
- Multiphase (VOF) Simulation Project
- Rotating Fan in Room
- Meshing with cfMesh
József Nagy, Bahram Haddadi and Christian Jordan
- blockMesh
- Discretization
- First simulation
- Grid convergence
- Installing
- Multiphase modeling (VOF)
- Parallelization
- Running your first case
- Stationary turbulence modelling (RAS)
- Transient turbulence modelling (RAS,LES)
- Transport equation
Håkan Nilsson
- Basic introduction to OpenFOAM
- Basics of C++
- Basics of programming in OpenFOAM
- Advanced programming in OpenFOAM
- Course of Håkan Nilsson with >150! tutorial cases
Stefan Radl
Main
- Session 0: Basics and Introduction
- Session A: What can you do with OpenFOAM?
- Session B: Usage of OpenFOAM (includes DPMFoam and MPPICFoam)
- Session C: Understand and Modify OpenFOAM
- Session D: Integration with FreeCAD
- Session E: Advanced Case Setup with Complex CAD
- Session F: Introducing a Time Step limitation due to high viscosity
Appendices
- Appendix A: Files & Other
- Appendix B: Templates (e.g., for plotting)
- Appendix C: Paraview Details
- Appendix D: external Case Studies
- Appendix E: Debuggers and Profiling
- Appendix F: OpenFOAM in Windows 10: The OpenSUSE Shell
Henrik Rusche
Bruno Santos et al.
Bruno Santos, Nelson Marques and Manoel Silvino Araújo
Gavin Tabor
- Action car case
- Writing new boundary conditions
- Simulating chocolate
- A detailed look at fvSchemes and fvSolution
