Difference between revisions of "Collection of the basics"

From OpenFOAM Wiki
Jump to navigation Jump to search
(Removed links for Tobias Holzmann Tutorials)
 
Line 8: Line 8:
  
 
* [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow.
 
* [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow.
 
* [https://wiki.openfoam.com/index.php?title=Cavity_by_Alex_Vakhrushev '''Cavity case'''] - The cavity case is one of the most basics tutorials. You will get a fast walkthrough with a good explanation about the mesh, running the case and postprocessing the results.
 
  
 
* [https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl '''Basics about OpenFOAM'''] - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
 
* [https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl '''Basics about OpenFOAM'''] - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
Line 30: Line 28:
  
 
* [https://wiki.openfoam.com/SessionA_by_Stefan_Radl '''Session A: Getting to know OpenFOAM'''] - Here you can find a basic talk about OpenFOAM.
 
* [https://wiki.openfoam.com/SessionA_by_Stefan_Radl '''Session A: Getting to know OpenFOAM'''] - Here you can find a basic talk about OpenFOAM.
 
  
 
=Further reading=
 
=Further reading=

Latest revision as of 11:15, 25 March 2020

These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.

Go back to Collection by topic.

Basics

  • Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.
  • Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
  • Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
  • Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.
  • T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
  • Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
  • Discretization – Part 2 - Use the scalarTransportFoam solver, do simulate the movement of a circular scalar spot region at the middle of a 100 × 100 cell mesh (10 m × 10 m), then move it to the right, to the top and diagonally.

Further reading