Difference between revisions of "Collection of the basics"
Jump to navigation
Jump to search
(Removed links for Tobias Holzmann Tutorials) |
Jozsef Nagy (talk | contribs) (→Basics) |
||
Line 8: | Line 8: | ||
* [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow. | * [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow. | ||
− | |||
− | |||
* [https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl '''Basics about OpenFOAM'''] - Here you will find a video on the very basics, history and philosophy of OpenFOAM. | * [https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl '''Basics about OpenFOAM'''] - Here you will find a video on the very basics, history and philosophy of OpenFOAM. | ||
Line 30: | Line 28: | ||
* [https://wiki.openfoam.com/SessionA_by_Stefan_Radl '''Session A: Getting to know OpenFOAM'''] - Here you can find a basic talk about OpenFOAM. | * [https://wiki.openfoam.com/SessionA_by_Stefan_Radl '''Session A: Getting to know OpenFOAM'''] - Here you can find a basic talk about OpenFOAM. | ||
− | |||
=Further reading= | =Further reading= |
Revision as of 11:15, 25 March 2020
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Collection by topic.
Basics
- Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.
- Basic case setup - Using icoFoam solver, simulate 75 s of flow in an elbow.
- Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.
- T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
- Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.
- Running your first case on your own - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
- Discretization – Part 2 - Use the scalarTransportFoam solver, do simulate the movement of a circular scalar spot region at the middle of a 100 × 100 cell mesh (10 m × 10 m), then move it to the right, to the top and diagonally.
- Hagen Poiseuille flow - Here you will find a basic tutorial on the Hagen Poiseuille flow.
- Session A: Getting to know OpenFOAM - Here you can find a basic talk about OpenFOAM.