Collection of the basics
Jump to navigation
Jump to search
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Collection by topic.
Basics
- First 3 OpenFOAM simulations - In this tutorial you will get a hands-on experience of the workflow of CFD simulations in OpenFOAM using three different cases (lid-driven cavity, pitzDaily & elbow).
- Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.
- Basic case setup - Using icoFoam solver, simulate 75 s of flow in an elbow.
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
- Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.
- Running your first case on your own - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
- Discretization – Part 2 - Use the scalarTransportFoam solver, do simulate the movement of a circular scalar spot region at the middle of a 100 × 100 cell mesh (10 m × 10 m), then move it to the right, to the top and diagonally.
- Hagen Poiseuille flow - Here you will find a basic tutorial on the Hagen Poiseuille flow.