Difference between revisions of "Day 1"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 3: | Line 3: | ||
=[https://wiki.openfoam.com/index.php?title=First_simulation_by_Jozsef_Nagy First simulation]= | =[https://wiki.openfoam.com/index.php?title=First_simulation_by_Jozsef_Nagy First simulation]= | ||
− | In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. | + | In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered: |
+ | |||
+ | * basic case setup | ||
+ | * initial values | ||
+ | * mesh | ||
+ | * simulation | ||
+ | * postprocessing | ||
+ | |||
=[https://wiki.openfoam.com/index.php?title=Cavity_by_Alex_Vakhrushev Cavity tutorial]= | =[https://wiki.openfoam.com/index.php?title=Cavity_by_Alex_Vakhrushev Cavity tutorial]= |
Revision as of 11:12, 14 September 2016
Go back to "3 weeks" series.
Contents
First simulation
In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:
- basic case setup
- initial values
- mesh
- simulation
- postprocessing
Cavity tutorial
This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now.
OpenFOAM basics
Here you will find a video on the basics of OpenFOAM.
blockMesh 1
In this first tutorial video you will try out the OpenFOAM internal utility blockMesh in order to create a simple mesh for a simulation.
blockMesh 2
In this second tutorial video you will continue the OpenFOAM basics from above.
blockMesh 3
Here you will find a summary on the basics of meshing with blockMesh.