Day 1

Go back to "3 weeks" series.

First simulation

In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:

• basic case setup
• initial values
• mesh
• simulation
• postprocessing

Cavity tutorial

This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now.

OpenFOAM basics

Here you will find a video on the basics of OpenFOAM.

blockMesh 1

In this first tutorial video you will try out the OpenFOAM internal utility blockMesh in order to create a simple mesh for a simulation.

blockMesh 2

In this second tutorial video you will continue the OpenFOAM basics from above.

blockMesh 3

Here you will find a summary on the basics of meshing with blockMesh.