Difference between revisions of "Day 1"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
| Line 13: | Line 13: | ||
=[https://wiki.openfoam.com/index.php?title=Cavity_by_Alex_Vakhrushev Cavity tutorial]= | =[https://wiki.openfoam.com/index.php?title=Cavity_by_Alex_Vakhrushev Cavity tutorial]= | ||
| − | This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now. | + | This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now. Here, you will get a fast walkthrough with a good explanation about |
| + | |||
| + | * the mesh | ||
| + | * running the case | ||
| + | * postprocessing the results. | ||
=[https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl OpenFOAM basics]= | =[https://wiki.openfoam.com/index.php?title=Basics_by_Stefan_Radl OpenFOAM basics]= | ||
Revision as of 06:56, 19 September 2016
Go back to "3 weeks" series.
Contents
First simulation
In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:
- basic case setup
- initial values
- mesh
- simulation (2D elbow case with three meshes)
- postprocessing
Cavity tutorial
This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now. Here, you will get a fast walkthrough with a good explanation about
- the mesh
- running the case
- postprocessing the results.
OpenFOAM basics
Here you will find a video on the basics of OpenFOAM.
blockMesh 1
In this first tutorial video you will try out the OpenFOAM internal utility blockMesh in order to create a simple mesh for a simulation.
blockMesh 2
In this second tutorial video you will continue the OpenFOAM basics from above.
blockMesh 3
Here you will find a summary on the basics of meshing with blockMesh.
