Difference between revisions of "Day 1"
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 46: | Line 46: | ||
* grading | * grading | ||
− | =[https://wiki.openfoam.com/index.php?title=BlockMesh_by_Ferras,_Fernandes_and_Nobrega blockMesh | + | =[https://wiki.openfoam.com/index.php?title=BlockMesh_by_Ferras,_Fernandes_and_Nobrega blockMesh - summary]= |
− | Yes, the first day is almost over. Look forward to your regeneration by finishing this last tutorial. Here you will find a summary on | + | Yes, the first day is almost over. Look forward to your regeneration by finishing this last tutorial. Here you will find a summary on meshing with blockMesh. You will find a |
+ | |||
+ | * visual description of the blockMeshDict dictionary | ||
+ | * fun geometries for exercise | ||
+ | |||
+ | Thank you for finishing the first day. We hope, that you had fun and you will continue tomorrow with [https://wiki.openfoam.com/index.php?title=Day_2 Day 2]. |
Revision as of 07:48, 19 September 2016
Go back to "3 weeks" series.
Contents
First simulation
In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:
- basic case setup
- initial values
- mesh
- simulation (2D elbow case with three meshes)
- postprocessing
Cavity tutorial
This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now. Here, you will get a fast walkthrough with a good explanation about
- the mesh
- running the case
- postprocessing the results.
OpenFOAM basics
Here you will find a video on the very basics of OpenFOAM. You will hear about
- OpenFOAM and what it is good for
- the history and philosophy behind it
- the basics and the structure.
blockMesh - basics
As already mentioned, we now revisit the cavity case with a special focus on the the OpenFOAM internal simple meshing utility called blockMesh. Study
- the dictionaries (e.g. blockMeshDict)
- mesh your case
- run and postprocess your simulation
blockMesh - advanced
In this second tutorial video you will try out your knowledge about blockMesh in order to create a more complicated mesh for a simulation. The focus is on
- scaling the mesh
- setting the vertices
- setting volumes (blocks)
- setting edges
- boundaries
- grading
blockMesh - summary
Yes, the first day is almost over. Look forward to your regeneration by finishing this last tutorial. Here you will find a summary on meshing with blockMesh. You will find a
- visual description of the blockMeshDict dictionary
- fun geometries for exercise
Thank you for finishing the first day. We hope, that you had fun and you will continue tomorrow with Day 2.