Day 1
Revision as of 11:13, 14 September 2016 by Jozsef Nagy (talk | contribs)
Go back to "3 weeks" series.
Contents
First simulation
In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM. The following topics will be covered:
- basic case setup
- initial values
- mesh
- simulation
- postprocessing
Cavity tutorial
This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now.
OpenFOAM basics
Here you will find a video on the basics of OpenFOAM.
blockMesh 1
In this first tutorial video you will try out the OpenFOAM internal utility blockMesh in order to create a simple mesh for a simulation.
blockMesh 2
In this second tutorial video you will continue the OpenFOAM basics from above.
blockMesh 3
Here you will find a summary on the basics of meshing with blockMesh.