Difference between revisions of "Day 14"

From OpenFOAM Wiki
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
Today we will concentrate on external and compressible flow. With the knowledge from [https://wiki.openfoam.com/index.php?title=Day_13 Day 13] about the thermodynamic models we will concentrate on high compressibility, as the physics behind these phenomena are not trivial. We will focus on
+
Today we will continue with programming. There is only one tutorial, but this tutorial consist of multiple examples and explains a lot.  
  
* external flows
+
Go back to [https://wiki.openfoam.com/index.php?title=%223_weeks%22_series "3 weeks" series].
* high compressibility
 
  
Go back to [https://wiki.openfoam.com/index.php?title=%223_weeks%22_series "3 weeks" series].
+
=[https://wiki.openfoam.com/Programming_by_Hakan_Nilsson Advanced programming by Håkan Nilsson]=
  
 +
Here you will find an introduction to advanced programming in OpenFOAM by Håkan Nilsson at Chalmers University of Technology. You will learn about
  
'''This section of the 3-weeks series is currently under maintanance.'''
+
* implementation of a turbulence model
 +
* implementation of a boundary condition
 +
* implementation of a function object
 +
* debugging in OpenFOAM
  
 
=End of day 14=
 
=End of day 14=
  
We arrived at the end of Day 14. The tutorial series is nearly at the end, but don't be sad, we still have one full day of joy and happiness for you. See you tomorrow!
+
We arrived at the end of Day 14. Hopefully the detailed information from today will further help you with your own problem setting.
 +
 
 +
If you have not already done so, try to start with your own problem at this stage.
 +
 
 +
The tutorial series is nearly at the end, but don't be sad, we still have one full day of joy and happiness for you. See you tomorrow!

Latest revision as of 12:29, 3 October 2018

Today we will continue with programming. There is only one tutorial, but this tutorial consist of multiple examples and explains a lot.

Go back to "3 weeks" series.

Advanced programming by Håkan Nilsson

Here you will find an introduction to advanced programming in OpenFOAM by Håkan Nilsson at Chalmers University of Technology. You will learn about

  • implementation of a turbulence model
  • implementation of a boundary condition
  • implementation of a function object
  • debugging in OpenFOAM

End of day 14

We arrived at the end of Day 14. Hopefully the detailed information from today will further help you with your own problem setting.

If you have not already done so, try to start with your own problem at this stage.

The tutorial series is nearly at the end, but don't be sad, we still have one full day of joy and happiness for you. See you tomorrow!