Difference between revisions of "Discretization by Jozsef Nagy"

From OpenFOAM Wiki
Jump to navigation Jump to search
(Updated link)
Line 1: Line 1:
* '''author''': Jozsef Nagy
+
* '''contributor''': Jozsef Nagy
 
* '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
 
* '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
 
* '''contact''': jozsef.nagy@jku.at
 
* '''contact''': jozsef.nagy@jku.at

Revision as of 06:34, 26 September 2016

  • contributor: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: jozsef.nagy@jku.at
  • OpenFOAM version: 2.3.0
  • Published under: CC BY-NC-SA license (creative commons licenses)

Go back to Day 4.

Discretization

In this tutorial

you will get a detailed introduction into discretization. The order of magnitude of the utilized discretization is as important as your grid resolution. A detailed knowledge on the basics will help you improve your simulations results. This tutorial gives you an understanding on the theory, an introduction on the implementation as well as the application of different schemes within an OpenFOAM case. The topics covered here are:

  • spatial discretization
  • face interpolation
  • changing schemes in OpenFOAM
  • divergence schemes
  • influence of discretization on the simulation results of a passive scalar
  • post processing