Difference between revisions of "First simulation by Jozsef Nagy"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 4: Line 4:
 
* '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
 
* '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
 
* '''contact''': <mail address='jozsef.nagy@jku.at' description='author'>click here for email address</mail>
 
* '''contact''': <mail address='jozsef.nagy@jku.at' description='author'>click here for email address</mail>
* '''OpenFOAM versions''': 2.3.0, 2.3.1, 2.4.0, 3.0.0, 3.0.1, 4.0, 4.1, 1606+, 1612+
+
* '''OpenFOAM versions''': 4.x, 1706+
 
* '''published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses])
 
* '''published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses])
  

Revision as of 11:49, 23 October 2017

  • contributor: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: click here for email address
  • OpenFOAM versions: 4.x, 1706+
  • published under: CC BY-NC-SA license (creative commons licenses)

Go back to Day 1.

Go back to "first glimpse" series

First simulation in OpenFOAM

In these videos

velocity magnitude of the elbow case at t=75s

you will learn about

  • the basic case setup of OpenFOAM
  • the initial values of your simulation
  • the mesh (e.g. the boundaries)
  • running the simulation of the flow in a 2D elbow case with three different meshes
  • post processing

You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow that you have to follow in order to run a successful simulation.

You can download the .msh file here:

msh-file

(left click on it, then right click on Raw, then save as)