Difference between revisions of "First simulation by Jozsef Nagy"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Andy Heather (talk | contribs) (Updated link) |
||
| Line 20: | Line 20: | ||
* the mesh (e.g. the boundaries) | * the mesh (e.g. the boundaries) | ||
* running the simulation of the flow in a 2D elbow case with three different meshes | * running the simulation of the flow in a 2D elbow case with three different meshes | ||
| − | * | + | * post processing |
| − | You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow | + | You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow that you have to follow in order to run a successful simulation. |
You can download the .msh file here: | You can download the .msh file here: | ||
| − | [https:// drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file] | + | [https://drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file] |
Revision as of 09:26, 20 September 2016
- author: Jozsef Nagy
- affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
- contact: jozsef.nagy@jku.at
- OpenFOAM version: 2.3.0
- published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 1.
First simulation in OpenFOAM
In these videos
you will learn about
- the basic case setup of OpenFOAM
- the initial values of your simulation
- the mesh (e.g. the boundaries)
- running the simulation of the flow in a 2D elbow case with three different meshes
- post processing
You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow that you have to follow in order to run a successful simulation.
You can download the .msh file here:
