First simulation by Jozsef Nagy
Revision as of 06:36, 26 September 2016 by Jozsef Nagy (talk | contribs)
- contributor: Jozsef Nagy
- affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
- contact: jozsef.nagy@jku.at
- OpenFOAM version: 2.3.0
- published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 1.
Go back to "first glimpse" series
First simulation in OpenFOAM
In these videos
you will learn about
- the basic case setup of OpenFOAM
- the initial values of your simulation
- the mesh (e.g. the boundaries)
- running the simulation of the flow in a 2D elbow case with three different meshes
- post processing
You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow that you have to follow in order to run a successful simulation.
You can download the .msh file here:
- contributor: Bahram Haddadi, Jozsef Nagy and Christian Jordan
- affiliation: Forschungsgruppe Thermische Verfahrenstechnik & Fluiddynamische Simulation am Institut für Verfahrenstechnik der Technischen Universität Wien, Austria
- contact: bahram.haddadi.sisakht@tuwien.ac.at
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
- additional acknowledgements: Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek
[http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20One.pdf First simulation in OpenFOAM]
In this [http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20One.pdf pdf] you will find a written step-by-step walkthrough of the tutorial above.