First simulation by Jozsef Nagy

From OpenFOAM Wiki
Revision as of 04:51, 15 September 2016 by Jozsef Nagy (talk | contribs)
Jump to navigation Jump to search
  • author: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: jozsef.nagy@jku.at
  • OpenFOAM version: 2.3.0
  • published under: CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses])

Go back to Day 1.

[https:// www.youtube.com/watch?v=KznljrgWSvo First simulation in OpenFOAM]

In these videos

  • [https:// www.youtube.com/watch?v=KznljrgWSvo part 1]
  • [https:// www.youtube.com/watch?v=bJTSKaxG58Y part 2]

you will learn about

  • the basic case setup of OpenFOAM
  • the initial values of your simulation
  • the mesh (e.g. the boundaries)
  • running the simulation of the flow in a 2D elbow case with three different meshes
  • postprocessing

You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow, that you have to follow in order to run a successful simulation.

Retrieved from "https://wiki.openfoam.com/index.php?title=First_simulation_by_Jozsef_Nagy&oldid=135"