First simulation by Jozsef Nagy

From OpenFOAM Wiki
Revision as of 08:53, 19 September 2016 by Jozsef Nagy (talk | contribs)
Jump to navigation Jump to search
  • author: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: jozsef.nagy@jku.at
  • OpenFOAM version: 2.3.0
  • published under: CC BY-NC-SA license (creative commons licenses)

Go back to Day 1.

First simulation in OpenFOAM

In these videos

you will learn about

  • the basic case setup of OpenFOAM
  • the initial values of your simulation
  • the mesh (e.g. the boundaries)
  • running the simulation of the flow in a 2D elbow case with three different meshes
  • postprocessing

You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow, that you have to follow in order to run a successful simulation.

You can download the .msh file here:

[https:// drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file]