First simulation by Jozsef Nagy

From OpenFOAM Wiki
Revision as of 04:55, 28 July 2020 by Jozsef Nagy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Go back to Day 1.

Go back to "first glimpse" series

First simulation in OpenFOAM

In these videos

velocity magnitude of the elbow case at t=75s

you will learn about

  • the basic case setup of OpenFOAM
  • the initial values of your simulation
  • the mesh (e.g. the boundaries)
  • running the simulation of the flow in a 2D elbow case with three different meshes
  • post processing

You will familiarize yourself with the terminal in Linux, where you will run all your simulations in OpenFOAM. You will also get a first idea on the work flow that you have to follow in order to run a successful simulation.

You can download the .msh file here:

msh-file

(left click on it, then right click on Raw, then save as)