Difference between revisions of "Integration with FreeCAD by Stefan Radl"
Jump to navigation
Jump to search
Stefan Radl (talk | contribs) |
Stefan Radl (talk | contribs) |
||
| Line 12: | Line 12: | ||
=Geometry and Surface Mesh Generation with FreeCAD= | =Geometry and Surface Mesh Generation with FreeCAD= | ||
| + | |||
| + | The training material is split into the following sessions: | ||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''part D.1: Introduction'''] | ||
| + | |||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''D.2 Overview & Spreadsheet Basics'''] | ||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''D.3 Spreadsheet and Sketches'''] | ||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''D.4 From sketch to 3D body'''] | ||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''D.5 3D Model and Facebinder'''] | ||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''D.6 Facebinder coloring and STL Surface Mesh'''] | ||
| + | |||
| + | |||
| + | * [https://www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/2_SessionC_Coding/12_OpenFOAM_coding_2_binningArray.mp4 '''part D.7: STL naming, scaling, and export'''] | ||
Revision as of 13:27, 7 February 2019
- contributor: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: click here for email address
- OpenFOAM version: any (tested for 4.0 and 5.0)
- Published under: CC BY-SA license (creative commons licenses)
Go back to Day 2.
Intro and Purpose
Geometry and Surface Mesh Generation with FreeCAD
The training material is split into the following sessions:
