Difference between revisions of "Introduction to OpenFOAM: A User View by Kenneth Hoste and Hrvoje Jasak"

From OpenFOAM Wiki
Jump to navigation Jump to search
(Updated link)
Line 1: Line 1:
 
* '''author''': Hrvoje Jasak and Kenneth Hoste
 
* '''author''': Hrvoje Jasak and Kenneth Hoste
−
* '''affiliation''': Wikki Ltd and Dept. of Electronics and Information Systems (ELIS) of Ghent University
+
* '''affiliation''': Wikki Ltd
−
* '''contact''': h.jasak@wikki.co.uk - kenneth.hoste@ugent.be
+
* '''contact''': kenneth.hoste@ugent.be - h.jasak@wikki.co.uk
 
* '''OpenFOAM version''': foam-extend 3.2
 
* '''OpenFOAM version''': foam-extend 3.2
−
* '''published under''': CC ??? license ([https://creativecommons.org/licenses creative commons licenses])
+
* '''published under''': CC ??? license ([https:// creativecommons.org/licenses creative commons licenses])
 
* '''additional acknowledgements''':  
 
* '''additional acknowledgements''':  
−
** HPC-UGent [http://www.ugent.be/hpc/en]
+
** HPC-UGent [http:// www.ugent.be/hpc/en]
−
** Flemish Supercomputer Centre (VSC): [https://www.vscentrum.be]
+
** Flemish Supercomputer Centre (VSC): [https:// www.vscentrum.be]
−
** SESAMENet [https://sesamenet.eu]
+
** SESAMENet [https:// sesamenet.eu]
 +
=[https:// www.youtube.com/watch?v=nVon5mC3UTs&spfreload=5 Introduction to OpenFOAM: A User View]=
  
−
Go back to [https://wiki.openfoam.com/index.php?title=Day_11 Day 11].
+
In this video series you will listen to the lecture of Professor Hrvoje Jasak on the basics of OpenFOAM held at Ghent University in May 2016. The applied version of OpenFOAM here is foam-extend 3.2, but the information is relevant for all versions. Feel free to follow the lecture or just sit back, relax and listen to the talk.  
  
−
=[https://www.youtube.com/watch?v=2FKoMY91SdM Programming in OpenFOAM]=
+
* Part 1:
−
 
+
** [https:// www.youtube.com/watch?v=nVon5mC3UTs&spfreload=5 screen and camera footage]
−
In this video series you will listen to the lecture of Professor Hrvoje Jasak on programming in OpenFOAM held at Ghent University in May 2016. The applied version of OpenFOAM here is foam-extend 3.2, but the information is relevant for all versions. Feel free to follow the lecture or just sit back, relax and listen to the talk.  
+
** [https:// www.youtube.com/watch?v=3iZfVmFkvB8 screen footage]
−
 
+
* Part 2:
−
The videos can be found here:
+
** [https:// www.youtube.com/watch?v=cM9RLZobnBA screen and camera footage]
−
* [https://www.youtube.com/watch?v=2FKoMY91SdM screen and camera footage]
+
** [https:// www.youtube.com/watch?v=o4vsafmxTpk screen footage]
−
* [https://www.youtube.com/watch?v=ScXa5W8IES4 screen footage]
+
* Part 3:
 +
** [https:// www.youtube.com/watch?v=g6xttytsl6s screen and camera footage]
 +
** [https:// www.youtube.com/watch?v=yoAnOfnXQu4 screen footage]
 +
* Part 4:
 +
** [https:// www.youtube.com/watch?v=IfJI_oMlW7o screen and camera footage]
 +
** [https:// www.youtube.com/watch?v=7LVrVVyVnck screen footage]
 +
* Part 5:
 +
** [https:// www.youtube.com/watch?v=LTMjPhs007g screen and camera footage]
 +
** [https:// www.youtube.com/watch?v=o4vsafmxTpk screen footage]

Revision as of 06:24, 26 September 2016

  • author: Hrvoje Jasak and Kenneth Hoste
  • affiliation: Wikki Ltd
  • contact: kenneth.hoste@ugent.be - h.jasak@wikki.co.uk
  • OpenFOAM version: foam-extend 3.2
  • published under: CC ??? license ([https:// creativecommons.org/licenses creative commons licenses])
  • additional acknowledgements:
    • HPC-UGent [http:// www.ugent.be/hpc/en]
    • Flemish Supercomputer Centre (VSC): [https:// www.vscentrum.be]
    • SESAMENet [https:// sesamenet.eu]

[https:// www.youtube.com/watch?v=nVon5mC3UTs&spfreload=5 Introduction to OpenFOAM: A User View]

In this video series you will listen to the lecture of Professor Hrvoje Jasak on the basics of OpenFOAM held at Ghent University in May 2016. The applied version of OpenFOAM here is foam-extend 3.2, but the information is relevant for all versions. Feel free to follow the lecture or just sit back, relax and listen to the talk.

  • Part 1:
    • [https:// www.youtube.com/watch?v=nVon5mC3UTs&spfreload=5 screen and camera footage]
    • [https:// www.youtube.com/watch?v=3iZfVmFkvB8 screen footage]
  • Part 2:
    • [https:// www.youtube.com/watch?v=cM9RLZobnBA screen and camera footage]
    • [https:// www.youtube.com/watch?v=o4vsafmxTpk screen footage]
  • Part 3:
    • [https:// www.youtube.com/watch?v=g6xttytsl6s screen and camera footage]
    • [https:// www.youtube.com/watch?v=yoAnOfnXQu4 screen footage]
  • Part 4:
    • [https:// www.youtube.com/watch?v=IfJI_oMlW7o screen and camera footage]
    • [https:// www.youtube.com/watch?v=7LVrVVyVnck screen footage]
  • Part 5:
    • [https:// www.youtube.com/watch?v=LTMjPhs007g screen and camera footage]
    • [https:// www.youtube.com/watch?v=o4vsafmxTpk screen footage]
Retrieved from "https://wiki.openfoam.com/index.php?title=Introduction_to_OpenFOAM:_A_User_View_by_Kenneth_Hoste_and_Hrvoje_Jasak&oldid=632"