Difference between revisions of "Meshing"

From OpenFOAM Wiki
Jump to navigation Jump to search
(Removed link to archived blockMesh tutorial)
Line 19: Line 19:
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 
* [https://wiki.openfoam.com/Meshing_in_GMSH_by_Robert_Lee '''GMSH'''] In this tutorial you will get a compact introduction into the work flow within the software GMSH for meshing.
 
* [https://wiki.openfoam.com/Meshing_in_GMSH_by_Robert_Lee '''GMSH'''] In this tutorial you will get a compact introduction into the work flow within the software GMSH for meshing.
 +
 +
'''Moving mesh'''
 +
 +
* [https://wiki.openfoam.com/Rotating_Mesh_Simultion_Project_by_Jozsef_Nagy Rotating Fan in Room] In this tutorial you will learn how to run a rotating mesh simulation.
  
 
=Further reading=
 
=Further reading=

Revision as of 07:34, 2 August 2019

The saying goes "Who owns the mesh, owns the solution". With the help of these tutorials you will learn how to create meshes for arbitrary geometries in order to run your simulations.

Go back to Collection by topic.

Meshing

Overview

Geometry

  • Geometry creation - Here you will get a detailed introduction into two alternatives for the creation of geometries as inputs for a CFD project in OpenFOAM.

Meshing

  • blockMesh - In the following tutorials you will find an introduction into meshing with the blockMesh utility: by Radl, by Nagy,by Bahram Haddadi
  • snappyHexMesh - This tutorial gives you an insight on how to create complex meshes within OpenFOAM and snappyHexMesh.
  • snappyHexMesh – Single region - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
  • snappyHexMesh – Multi region - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
  • GMSH In this tutorial you will get a compact introduction into the work flow within the software GMSH for meshing.

Moving mesh

Further reading