Difference between revisions of "Meshing"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 19: Line 19:
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 
* [https://wiki.openfoam.com/Meshing_with_cfMesh_by_Jozsef_Nagy '''Meshing with cfMesh'''] - In this tutorial you will learn the basics of meshing with cfMesh.
 
* [https://wiki.openfoam.com/Meshing_with_cfMesh_by_Jozsef_Nagy '''Meshing with cfMesh'''] - In this tutorial you will learn the basics of meshing with cfMesh.
 +
* [https://wiki.openfoam.com/Simulation_project_of_an_exhaust_manifold_by_Tobias_Holzmann '''How To Build a complete OpenFOAM Project - Exhaust manifold'''] - In this tutorial you will learn about meshing in a full simulation project.
  
  

Revision as of 05:56, 3 August 2020

The saying goes "Who owns the mesh, owns the solution". With the help of these tutorials you will learn how to create meshes for arbitrary geometries in order to run your simulations.

Go back to Collection by topic.

Meshing

Overview

Geometry

  • Geometry creation - Here you will get a detailed introduction into two alternatives for the creation of geometries as inputs for a CFD project in OpenFOAM.

Meshing


Moving mesh

Mesh dependence study

Further reading