Difference between revisions of "Meshing"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 18: Line 18:
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Single_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Single region'''] - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Single_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Single region'''] - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 
* [https://wiki.openfoam.com/SnappyHexMesh_%E2%80%93_Multi_region_by_Bahram_Haddadi_and_colleagues '''snappyHexMesh – Multi region'''] - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
 +
* * [https://wiki.openfoam.com/Meshing_with_cfMesh_by_Jozsef_Nagy '''Meshing with cfMesh'''] - In this tutorial you will learn the basics of meshing with cfMesh.
  
  

Revision as of 06:17, 25 March 2020

The saying goes "Who owns the mesh, owns the solution". With the help of these tutorials you will learn how to create meshes for arbitrary geometries in order to run your simulations.

Go back to Collection by topic.

Meshing

Overview

Geometry

  • Geometry creation - Here you will get a detailed introduction into two alternatives for the creation of geometries as inputs for a CFD project in OpenFOAM.

Meshing

  • blockMesh - In the following tutorials you will find an introduction into meshing with the blockMesh utility: by Nagy,by Bahram Haddadi
  • snappyHexMesh - This tutorial gives you an insight on how to create complex meshes within OpenFOAM and snappyHexMesh.
  • snappyHexMesh – Single region - Mesh a flange geometry and simulate heat transfer in it using scalarTransportFoam.
  • snappyHexMesh – Multi region - In this tutorial a geometry with more than one region is meshed using snappyHexMesh and simulated using chtMultiRegionFoam.
  • * Meshing with cfMesh - In this tutorial you will learn the basics of meshing with cfMesh.


Moving mesh

Further reading