Meshing

From OpenFOAM Wiki
Revision as of 07:31, 31 March 2017 by Jozsef Nagy (talk | contribs)
Jump to navigation Jump to search

Small introduction

Go back to Collection by topic.

Meshing

Overview

Geometry

Here you will get a detailed introduction into two alternatives for the creation of geometries as inputs for a CFD project in OpenFOAM.

Meshing

  • In the following three tutorials you will find an introduction into meshing with the blockMesh utility.

by Radl by Nagy by Nobrega et al.

  • This tutorial gives you an insight on how to create complex meshes within OpenFOAM.
  • In this tutorial you will get a compact introduction into the work flow within the software GMSH for meshing.

Further reading