Multi-Phase and Free Surface Flows by Kenneth Hoste and Hrvoje Jasak

From OpenFOAM Wiki
Revision as of 13:00, 20 September 2016 by Jozsef Nagy (talk | contribs)
Jump to navigation Jump to search
  • author: Hrvoje Jasak and Kenneth Hoste
  • affiliation: Wikki Ltd and Dept. of Electronics and Information Systems (ELIS) of Ghent University
  • contact: h.jasak@wikki.co.uk - kenneth.hoste@ugent.be
  • OpenFOAM version: foam-extend 3.2
  • published under: CC ??? license ([https:// creativecommons.org/licenses creative commons licenses])
  • additional acknowledgements:
    • HPC-UGent [http:// www.ugent.be/hpc/en]
    • Flemish Supercomputer Centre (VSC): [https:// www.vscentrum.be]
    • SESAMENet [https:// sesamenet.eu]

Go back to Day 9.

[https:// www.youtube.com/watch?v=nVon5mC3UTs&spfreload=5 Multiphase, free surface flows and rising bubbles]

In these videos you will listen to the lecture of Professor Hrvoje Jasak on multiphase, free surface flows as well as rising bubbles in OpenFOAM held at Ghent University in May 2016. The applied version of OpenFOAM here is foam-extend 3.2, but most of the information is relevant for all versions. Feel free to follow the lecture or just sit back, relax and listen to the talk. You will learn about

  • multiphase flow modeling
  • eulerian multiphase model
  • free surface flow modeling
  • free surface tracking
  • lagrangian particle tracking
  • liquid film model

The videos can be found here:

  • [https:// www.youtube.com/watch?v=91nLxKl_Uy0 Multiphase and free surface flows - screen and camera footage]
  • [https:// www.youtube.com/watch?v=oPiDnB8Ibc8 Multiphase and free surface flows - screen footage]
  • [https:// www.youtube.com/watch?v=Wky5ru-ZuQM Rising bubble training case - screen and camera footage]
  • [https:// www.youtube.com/watch?v=w8G7xFFcudg Rising bubble training case - screen footage]