Difference between revisions of "Multiphase modeling"

From OpenFOAM Wiki
Jump to navigation Jump to search
 
(16 intermediate revisions by 2 users not shown)
Line 6: Line 6:
  
 
'''Intro and Overview'''
 
'''Intro and Overview'''
* [https://wiki.openfoam.com/Multi-Phase_and_Free_Surface_Flows_by_Kenneth_Hoste_and_Hrvoje_Jasak Hoste and Jasak] provide a in-depth introduction into a variety of models for multiphase flows.
+
* [https://wiki.openfoam.com/Multi-Phase_and_Free_Surface_Flows_by_Kenneth_Hoste_and_Hrvoje_Jasak '''Different models for multiphase flows'''] - Hoste and Jasak provide a in-depth introduction into a variety of models for multiphase flows.
  
 
'''Volume of Fluid'''
 
'''Volume of Fluid'''
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Jozsef_Nagy Nagy] provides a walk through of the dam break tutorial. [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Bahram_Haddadi Haddadi et al.] detail on the same tutorial.
+
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Jozsef_Nagy '''Volume-of-fluid method - dam break case'''] - Nagy provides a walk through of the dam break tutorial. *
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Joel_Guerrero Guerrero] details on setup, control and monitor of VoF simulations.
+
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Bahram_Haddadi '''Multiphase'''] - Use the interFoam solver to simulate breaking of a dam for 2s.
* [https://wiki.openfoam.com/Multiphase_flows_in_iron_casting_by_Alexander_Vakhrushev Vakhrushev] details on the VoF solver, and its application to iron casting.
+
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Joel_Guerrero '''Volume-of-fluid method - two examples'''] - Guerrero details on setup, control and monitor of VoF simulations.
 +
* [https://wiki.openfoam.com/Multiphase_(VOF)_Simulation_Project_by_Jozsef_Nagy '''Multiphase (VOF) simulation project'''] - In this video series Nagy guides you through an entire simulation project for a multiphase (VOF) flow from the geometry over mesh set up and creation as well as case set up and running the simulation up until the evaluation of the results.
 +
* [https://wiki.openfoam.com/Hysing_benchmark_by_Lionel_Gamet '''Hysing benchmark'''] - In this tutorial you will find a reference test case for VoF simulations. It is an elementary quantitative benchmark configuration with reference data in literature.
 +
* [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising.
 +
* [https://wiki.openfoam.com/Free_surface_flows_in_OpenFOAM_by_Victoria_Korchagova '''How to use free-surface flows in OpenFOAM'''] - Here you will find a compact introduction to the theory behind free surface flows in OpenFOAM, a step-by-step guide to run the 2D spillway tutorial and an intro for hydrodynamic instabilities (simulation of Rayleigh - Taylor instability).
 +
* [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations.
  
 
=Further reading=
 
=Further reading=
  
* J. Nagy: [http://catalogplus.tuwien.ac.at/primo_library/libweb/action/display.do?tabs=detailsTab&ct=display&fn=search&doc=UTW_aleph_acc000583571&indx=1&recIds=UTW_aleph_acc000583571&recIdxs=0&elementId=0&renderMode=poppedOut&displayMode=full&frbrVersion=&frbg=&&dscnt=0&scp.scps=scope%3A%28UTW_O_SFX%29%2Cscope%3A%28UTW_aleph_acc%29%2Cprimo_central_multiple_fe&mode=Basic&vid=UTW&srt=rank&tab=default_tab&vl%28freeText0%29=nagy%20jozsef&dum=true&dstmp=1490948800849 Untersuchung von mehrphasigen, kompressiblen Strömungen durch Simulation und Experiment], PhD thesis, Technische Universität Wien, 2012.
+
'''Theses'''
 +
 
 +
* J. Nagy: [http://catalogplus.tuwien.ac.at/primo_library/libweb/action/display.do?tabs=detailsTab&ct=display&fn=search&doc=UTW_aleph_acc000583571&indx=1&recIds=UTW_aleph_acc000583571&recIdxs=0&elementId=0&renderMode=poppedOut&displayMode=full&frbrVersion=&frbg=&&dscnt=0&scp.scps=scope%3A%28UTW_O_SFX%29%2Cscope%3A%28UTW_aleph_acc%29%2Cprimo_central_multiple_fe&mode=Basic&vid=UTW&srt=rank&tab=default_tab&vl%28freeText0%29=nagy%20jozsef&dum=true&dstmp=1490948800849 ''Untersuchung von mehrphasigen, kompressiblen Strömungen durch Simulation und Experiment''], PhD thesis, Technische Universität Wien, 2012.

Latest revision as of 20:38, 25 April 2021

Multiphase modeling is a challenging task. With these tutorials you will learn, how to model flows, where you have multiple phases.

Go back to Collection by topic.

Multiphase modeling

Intro and Overview

Volume of Fluid

  • Volume-of-fluid method - dam break case - Nagy provides a walk through of the dam break tutorial. *
  • Multiphase - Use the interFoam solver to simulate breaking of a dam for 2s.
  • Volume-of-fluid method - two examples - Guerrero details on setup, control and monitor of VoF simulations.
  • Multiphase (VOF) simulation project - In this video series Nagy guides you through an entire simulation project for a multiphase (VOF) flow from the geometry over mesh set up and creation as well as case set up and running the simulation up until the evaluation of the results.
  • Hysing benchmark - In this tutorial you will find a reference test case for VoF simulations. It is an elementary quantitative benchmark configuration with reference data in literature.
  • Bubble rising in a spiralling path in a large tank - In this tutorial you will learn about a spralling buble rising.
  • How to use free-surface flows in OpenFOAM - Here you will find a compact introduction to the theory behind free surface flows in OpenFOAM, a step-by-step guide to run the 2D spillway tutorial and an intro for hydrodynamic instabilities (simulation of Rayleigh - Taylor instability).
  • The stationary droplet - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations.

Further reading

Theses