Difference between revisions of "Multiphase modeling"

From OpenFOAM Wiki
Jump to navigation Jump to search
(14 intermediate revisions by 3 users not shown)
Line 9: Line 9:
  
 
'''Volume of Fluid'''
 
'''Volume of Fluid'''
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Jozsef_Nagy '''Volume-of-fluid method - Dam break case'''] - Nagy provides a walk through of the dam break tutorial. [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Bahram_Haddadi Haddadi et al.] detail on the same tutorial.
+
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Jozsef_Nagy '''Volume-of-fluid method - dam break case'''] - Nagy provides a walk through of the dam break tutorial. *
* [https://wiki.openfoam.com/Multiphase_modeling_(VOF)_by_Joel_Guerrero '''Volume-of-fluid method - two examples'''] - Guerrero details on setup, control and monitor of VoF simulations.
+
* [https://wiki.openfoam.com/Multiphase_(VOF)_Simulation_Project_by_Jozsef_Nagy '''Multiphase (VOF) simulation project'''] - In this video series Nagy guides you through an entire simulation project for a multiphase (VOF) flow from the geometry over mesh set up and creation as well as case set up and running the simulation up until the evaluation of the results.
* [https://wiki.openfoam.com/Multiphase_flows_in_iron_casting_by_Alexander_Vakhrushev '''Volume-of-fluid method in iron casting'''] - Vakhrushev details on the VoF solver, and its application to iron casting.
+
* [https://wiki.openfoam.com/Hysing_benchmark_by_Lionel_Gamet '''Hysing benchmark'''] - In this tutorial you will find a reference test case for VoF simulations. It is an elementary quantitative benchmark configuration with reference data in literature.
 +
* [https://wiki.openfoam.com/Bubble_rising_in_a_spiralling_path_in_a_large_tank_by_Lionel_Gamet '''Bubble rising in a spiralling path in a large tank'''] - In this tutorial you will learn about a spralling buble rising.
 +
* [https://wiki.openfoam.com/The_stationary_droplet_by_Lionel_Gamet '''The stationary droplet'''] - In this tutorial you will learn about how to reduce the spurious currents appearing in VoF simulations.
 +
 
 +
Check the [https://wiki.openfoam.com/Multiphase_modeling_archive '''Archive'''] section for more (however not fully up to date) multiphase tutorials.
  
 
=Further reading=
 
=Further reading=

Revision as of 12:36, 1 December 2022

Multiphase modeling is a challenging task. With these tutorials you will learn, how to model flows, where you have multiple phases.

Go back to Collection by topic.

Multiphase modeling

Intro and Overview

Volume of Fluid

Check the Archive section for more (however not fully up to date) multiphase tutorials.

Further reading

Theses