Multiphase modeling (VOF) by Jozsef Nagy

From OpenFOAM Wiki
Revision as of 12:58, 28 September 2016 by Jozsef Nagy (talk | contribs)
Jump to navigation Jump to search
  • contributor: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: jozsef.nagy@jku.at
  • OpenFOAM version: 2.3.0
  • Published under: CC BY-NC-SA license (creative commons licenses)

Go back to Day 9.

Multiphase modelling (VOF)

liquid phase fraction

In these videos

you will discover how to model multiple phases e.g. air and water. You will understand the idea between the models describing a gaseous and a liquid phase and how to set up a case with two different set of material parameters. You will learn about

  • modelling of two immiscible fluids
  • case setup
  • initial and boundary conditions
  • grid refinement
  • post processing





  • contributor: Bahram Haddadi, Jozsef Nagy and Christian Jordan
  • affiliation: Forschungsgruppe Thermische Verfahrenstechnik & Fluiddynamische Simulation am Institut für Verfahrenstechnik der Technischen Universität Wien, Austria
  • contact: click here for email address
  • OpenFOAM version: 2.3.0
  • Published under: CC BY-NC-SA license (creative commons licenses)
  • additional acknowledgements: Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek

[http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eight.pdf Multiphase modelling (VOF)]

In this [http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eight.pdf pdf] you will find a written step-by-step walkthrough of the tutorial above.