Programming by Kenneth Hoste and Hrvoje Jasak

From OpenFOAM Wiki
Revision as of 06:27, 26 September 2016 by Jozsef Nagy (talk | contribs) (Created page with "* '''author''': Hrvoje Jasak and Kenneth Hoste * '''affiliation''': Wikki Ltd * '''contact''': kenneth.hoste@ugent.be - h.jasak@wikki.co.uk * '''OpenFOAM version''': foam-exte...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • author: Hrvoje Jasak and Kenneth Hoste
  • affiliation: Wikki Ltd
  • contact: kenneth.hoste@ugent.be - h.jasak@wikki.co.uk
  • OpenFOAM version: foam-extend 3.2
  • published under: CC ??? license ([https:// creativecommons.org/licenses creative commons licenses])
  • additional acknowledgements:
    • HPC-UGent [http:// www.ugent.be/hpc/en]
    • Flemish Supercomputer Centre (VSC): [https:// www.vscentrum.be]
    • SESAMENet [https:// sesamenet.eu]

Go back to Day 11.

[https:// www.youtube.com/watch?v=2FKoMY91SdM Programming in OpenFOAM]

In this video series you will listen to the lecture of Professor Hrvoje Jasak on programming in OpenFOAM held at Ghent University in May 2016. The applied version of OpenFOAM here is foam-extend 3.2, but the information is relevant for all versions. Feel free to follow the lecture or just sit back, relax and listen to the talk.

The videos can be found here:

  • [https:// www.youtube.com/watch?v=2FKoMY91SdM screen and camera footage]
  • [https:// www.youtube.com/watch?v=ScXa5W8IES4 screen footage]