Difference between revisions of "Programming by Stefan Radl"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 1: | Line 1: | ||
* '''contributor''': Stefan Radl | * '''contributor''': Stefan Radl | ||
* '''affiliation''': Technische Universität Graz, Austria | * '''affiliation''': Technische Universität Graz, Austria | ||
− | * '''contact''': radl@tugraz.at | + | * '''contact''': <mail address='radl@tugraz.at' description='author'>click here for email address</mail> |
* '''OpenFOAM version''': 1.7/3.0 | * '''OpenFOAM version''': 1.7/3.0 | ||
* '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) | * '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) |
Revision as of 13:14, 28 September 2016
- contributor: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: click here for email address
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 12.
Programming - introduction
These video will give you a step by step walk through of programming your own utility and application. It will guide you through the steps in C++ to write the code and compile it. You will test the code with a simple case. The focus is on:
- C++ basics
- compilation
- code structure
- starting point
- testing
The videos can be found here: