Programming by Stefan Radl
Revision as of 12:56, 21 September 2016 by Jozsef Nagy (talk | contribs)
- author: Stefan Radl
- affiliation: Technische Universität Graz, Austria
- contact: radl@tugraz.at
- OpenFOAM version: 1.7/3.0
- Published under: CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses])
Go back to Day 12.
[http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/11_OpenFOAM_coding_1.mp4 Programming - introduction]
These video will give you a step by step walkthrough of programming your own utility and application. It will guide you through the steps in C++ to write the code and compile it. You will test the code with a simple case. The focus is on:
- C++ basics
- compilation
- code structure
- starting point
- testing
The videos can be found here:
- [http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/11_OpenFOAM_coding_1.mp4 part 1]
- [http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/12_OpenFOAM_coding_2_binningArray.mp4 part 2]
- [http:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/13_OpenFOAM_coding_3_meshInspector.mp4 part 3]
- [https:// www.tugraz.at/fileadmin/user_upload/Institute/IPPT/Area-PharmEng_Particles/SoftwareTraining/OpenFOAM/14_OpenFOAM_coding_4_passiveScalarFoam.mp4 part 4]