Difference between revisions of "Reacting flow by Bahram Haddadi and colleagues"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Andy Heather (talk | contribs) (Updated link) |
||
| Line 3: | Line 3: | ||
* '''contact''': bahram.haddadi.sisakht@tuwien.ac.at | * '''contact''': bahram.haddadi.sisakht@tuwien.ac.at | ||
* '''OpenFOAM version''': 2.3.0 | * '''OpenFOAM version''': 2.3.0 | ||
| − | * '''Published under''': CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses]) | + | * '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) |
* '''additional acknowledgements''': Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek | * '''additional acknowledgements''': Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek | ||
Go back to [https://wiki.openfoam.com/index.php?title=Day_13 Day 13]. | Go back to [https://wiki.openfoam.com/index.php?title=Day_13 Day 13]. | ||
| − | =[http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf Reacting elbow]= | + | =[http://www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf Reacting elbow]= |
| − | In this [http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf pdf] you will get a short introduction about reacting flows and how to modify your case setup for a successful simulation. You will learn about | + | In this [http://www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf pdf] you will get a short introduction about reacting flows and how to modify your case setup for a successful simulation. You will learn about |
* boundary and initial conditions | * boundary and initial conditions | ||
| − | * multi-species and reaction | + | * multi-species and reaction modelling |
* dictionaries | * dictionaries | ||
* running the simulation | * running the simulation | ||
| − | * | + | * post processing |
You can download the .msh file here: | You can download the .msh file here: | ||
| − | [https:// drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file] | + | [https://drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file] |
You are advised to refine this mesh '''twice''' for the simulation with the command | You are advised to refine this mesh '''twice''' for the simulation with the command | ||
refineMesh -overwrite | refineMesh -overwrite | ||
Revision as of 10:05, 28 September 2016
- contributor: Bahram Haddadi and Christian Jordan
- affiliation: Forschungsgruppe Thermische Verfahrenstechnik & Fluiddynamische Simulation am Institut für Verfahrenstechnik der Technischen Universität Wien, Austria
- contact: bahram.haddadi.sisakht@tuwien.ac.at
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
- additional acknowledgements: Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek
Go back to Day 13.
Reacting elbow
In this pdf you will get a short introduction about reacting flows and how to modify your case setup for a successful simulation. You will learn about
- boundary and initial conditions
- multi-species and reaction modelling
- dictionaries
- running the simulation
- post processing
You can download the .msh file here:
You are advised to refine this mesh twice for the simulation with the command
refineMesh -overwrite
