Reacting flow by Bahram Haddadi and colleagues
Revision as of 05:35, 23 September 2016 by Jozsef Nagy (talk | contribs)
- author: Bahram Haddadi and Christian Jordan
- affiliation: Forschungsgruppe Thermische Verfahrenstechnik & Fluiddynamische Simulation am Institut für Verfahrenstechnik der Technischen Universität Wien, Austria
- contact: bahram.haddadi.sisakht@tuwien.ac.at
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license ([https:// creativecommons.org/licenses creative commons licenses])
Go back to Day 13.
[http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf Reacting elbow]
In this [http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Eleven.pdf pdf] you will get a short introduction about reacting flows and how to modify your case setup for a successful simulation. You will learn about
- boundary and initial conditions
- multi-species and reaction modeling
- dictionaries
- running the simulation
- postprocessing
You can download the .msh file here:
[https:// drive.google.com/file/d/0B7cQdWsMw_2uYXdUVEJMNUJzdmM/edit?usp=sharing msh-file]
You are advised to refine this mesh twice for the simulation with the command
refineMesh -overwrite
