Running your first case by Jozsef Nagy

From OpenFOAM Wiki
Revision as of 09:42, 20 September 2016 by Andy Heather (talk | contribs) (Updated link)
Jump to navigation Jump to search
  • author: Jozsef Nagy
  • affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
  • contact: jozsef.nagy@jku.at
  • OpenFOAM version: 2.3.0
  • published under: CC BY-NC-SA license (creative commons licenses)

Go back to Day 5.

Running your first case on your own

In this [https:// www.youtube.com/watch?v=jfDzFPaPPug video] you will be given a case, that you will have to set up and run on your own. You will

  • create your mesh
  • set up initial and boundary conditions
  • set up physical properties
  • set correct numerical settings
  • run your simulation
  • post process your simulation

Please do not skip this tutorial and do not take yourself the possibility to fight yourself though all the way to the very end. This is one of the best feelings while working with OpenFOAM.

There is a solution for the case, that you are stuck, but try to watch it once you are confident, that you found the correct way on your own.

Have fun!