Difference between revisions of "Simulation project of an exhaust manifold by Tobias Holzmann"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 7: | Line 7: | ||
Go back to [https://wiki.openfoam.com/Collection_of_the_basics Basics]. | Go back to [https://wiki.openfoam.com/Collection_of_the_basics Basics]. | ||
− | Go back to [https://wiki.openfoam.com/ | + | Go back to [https://wiki.openfoam.com/Day_15 Day 15]. |
=[http://www.holzmann-cfd.de/index.php/en/4-create-a-project How To Build a Project - Exhaust manifold]= | =[http://www.holzmann-cfd.de/index.php/en/4-create-a-project How To Build a Project - Exhaust manifold]= |
Revision as of 09:25, 20 July 2017
- contributor: Tobias Holzmann
- affiliation: Holzmann CFD
- contact: click here for email address
- OpenFOAM version: 4.x (all tutorials are updated to 4.x since 23.11.16)
- published under: GPL v3 license
Go back to Basics.
Go back to Day 15.
How To Build a Project - Exhaust manifold
The following screencasts will guide you through a CFD simulation project with an exhaust manifold.
4.1 Start a Project
- Generate the project folder
- Get your geometry file
- Load it to Salome for preparation
4.2 Prepare the Geometry
- Geometry preparation
- Close the geometry
- Further preparation for reparing
4.3 Reparing the Geometry
- Further reparing the geometry for the next steps
4.4 Surface Triangulation
- Generate patches for OpenFOAM
- Showing the differences between CAD exported STLs and manuel triangulated one
- Triangulation of the patches
- Generating the background mesh
4.5 STL Preparation
- Exporting the background mesh and STLs
- Preparing STLs for a region STL (compound)
- Checking for water proofness
- Transforming the background mesh to an OpenFOAM mesh
4.6 First snappyHexMesh
- Meshing the geometry with snappyHexMesh
- Setting up the snappyHexMesh file
- Explaining a few things about the snappyHexMeshDict and the keywords
4.7 Optimizing the Mesh
- Further discussion of different keywords
- Optimizing the mesh
- Feature snapping
- Implicit and explicit feature edge snapping
- Generate feature edges
- Generation of layers
4.8 Boundary Set-up and First Run
- Set-up of simple boundary conditions for p and U
- Start the solver
- Check out the first numerical results
4.9 Adbanced Boundary Conditions
- Set-up of more physical boundary conditions
- Discussion about the boundary face calculation
- Building a mixed boundary condition (codedMixed)