View source for Swak4Foam and PyFoam by Bruno Santos

[[category:post-processing]]
* '''contributor''': Bruno Santos (1) and Nelson Marques (1), with revision by Manoel Silvino Araújo (2)
* '''affiliation''': blueCAPE Lda, Portugal (1) and Universidade Federal do Pará, Brasil (2)
* '''contact''': [http://www.bluecape.com.pt/contact (1)], <mail address='silvino@ufpa.br' description='author'>click here for email address</mail> (2)
* '''OpenFOAM version''': OpenFOAM 2.3/2.4, swak4Foam 0.3.1, PyFoam 0.6.4
* '''Published under''': CC BY-NC license ([https://creativecommons.org/licenses creative commons licenses])

Go back to [https://wiki.openfoam.com/index.php?title=Day_2 Day 2].

=[https://github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/A2-slides.pdf Auxiliary Post processing – swak4Foam and PyFoam]=

In this [https://github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/A2-slides.pdf pdf] you will find a quick introduction on how to postprocess your simulation results with the tools swak4Foam and PyFoam. 

You can download the case files [https://github.com/foam-at-pt/foam-at-pt.github.io/releases/download/PrimeiroEncontro/A2-cases.tar.gz here].