Difference between revisions of "Meshing with cfMesh by Jozsef Nagy"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 3: | Line 3: | ||
* '''affiliation''': eulerian-solutions e.U., Linz, Austria | * '''affiliation''': eulerian-solutions e.U., Linz, Austria | ||
* '''contact''': <mail address='jnmlujnmlu@gmail.com' description='author'>click here for email address</mail> | * '''contact''': <mail address='jnmlujnmlu@gmail.com' description='author'>click here for email address</mail> | ||
− | * '''OpenFOAM versions''': | + | * '''OpenFOAM versions''': v2106 |
* '''Published under''': CC BY-NC-ND license ([https://creativecommons.org/licenses creative commons licenses]) | * '''Published under''': CC BY-NC-ND license ([https://creativecommons.org/licenses creative commons licenses]) | ||
Revision as of 06:09, 30 November 2021
- contributor: Jozsef Nagy
- affiliation: eulerian-solutions e.U., Linz, Austria
- contact: click here for email address
- OpenFOAM versions: v2106
- Published under: CC BY-NC-ND license (creative commons licenses)
Go back to Collection by authors.
Go back to Meshing.
Contents
Meshing with cfMesh
Guided video tutorial
Provided material
For this tutorial the following material will be provided:
geometry | STL files |
mesh | you will create the mesh yourself |
simulation case | optionally you can run any simulation as a homework |
commands | cartesianMesh |
- Here you can download the geometry files.
Description
In this tutorial you will learn how you create a mesh with cfMesh using a certain set of STL files.
Commands to be executed:
cartesianMesh
Check out the User Guide (see details in the video) for advanced meshing settings.
In this tutorial we will take a look at the settings for the basic mesh resolution as well as local refinement along STL files. We will also add layers to our mesh.
Prerequisites
This tutorial assumes basic knowledge in the handling of both OpenFOAM and Linux. A working installation of the versions indicated above is needed. A working version of Paraview is required.
cfMesh is only available for OpenFOAM versions from www.openfoam.com out-of-the-box, not for www.openfoam.org. For the second you have to compile it yourself!