Difference between revisions of "Collection of the basics"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 20: | Line 20: | ||
* [https://wiki.openfoam.com/Simulation_project_of_an_exhaust_manifold_by_Tobias_Holzmann '''Simulation project of an exhaust manifold'''] - These screencasts will guide you through an entire CFD simulation project with an exhaust manifold. | * [https://wiki.openfoam.com/Simulation_project_of_an_exhaust_manifold_by_Tobias_Holzmann '''Simulation project of an exhaust manifold'''] - These screencasts will guide you through an entire CFD simulation project with an exhaust manifold. | ||
+ | |||
+ | * [https://wiki.openfoam.com/Basic_introduction_by_Hakan_Nilsson '''Basic Introduction to OpenFOAM'''] - These pdfs will give you an excellent start into CFD with OpenFOAM. | ||
=Further reading= | =Further reading= |
Revision as of 04:53, 5 September 2017
These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.
Go back to Collection by topic.
Basics
- Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM. The pdf version can be found here.
- Cavity case - The cavity case is one of the most basics tutorials. You will get a fast walkthrough with a good explanation about the mesh, running the case and postprocessing the results.
- Basics about OpenFOAM - Here you will find a video on the very basics, history and philosophy of OpenFOAM.
- Cavity case revisited - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
- Taylor Couette flow - In this short tutorial you will experience your first steady state simulation, where you can directly compare your results with experiments from literature.
- T-junction case - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
- Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
- Simulation project of an exhaust manifold - These screencasts will guide you through an entire CFD simulation project with an exhaust manifold.
- Basic Introduction to OpenFOAM - These pdfs will give you an excellent start into CFD with OpenFOAM.