Difference between revisions of "Collection of the basics"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
=Basics=
 
=Basics=
  
−
* [https://wiki.openfoam.com/First_OpenFOAM_Simulation_by_Divyesh_Variya_(DD_Fluids) '''First 3 OpenFOAM simulations'''] - In this tutorial you will get a hands-on experience of the workflow of CFD simulations in OpenFOAM using three different cases (lid-driven cavity, pitzDaily & elbow).
+
 
  
 
* [https://wiki.openfoam.com/index.php?title=First_simulation_by_Jozsef_Nagy '''Elbow case'''] - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.  
 
* [https://wiki.openfoam.com/index.php?title=First_simulation_by_Jozsef_Nagy '''Elbow case'''] - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.  
  
−
* [https://wiki.openfoam.com/First_simulation_by_Bahram_Haddadi '''Basic case setup'''] - Using icoFoam solver, simulate 75 s of flow in an elbow.
 
−
 
−
* [https://wiki.openfoam.com/index.php?title=Cavity_by_Joel_Guerrero '''Cavity case revisited'''] - Here you will be taken into the depth of an OpenFOAM case in order to understand all the important in- and outputs required for a CFD simulation in OpenFOAM.
 
−
 
−
* [https://wiki.openfoam.com/index.php?title=T-junction_by_Bahram_Haddadi_and_colleagues '''T-junction case'''] - In this tutorial you will try a simple simulation with the your newly acquired knowledge on CFD in OpenFOAM.
 
  
 
* [https://wiki.openfoam.com/Introduction_to_OpenFOAM:_A_User_View_by_Kenneth_Hoste_and_Hrvoje_Jasak '''Introductory course'''] - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
 
* [https://wiki.openfoam.com/Introduction_to_OpenFOAM:_A_User_View_by_Kenneth_Hoste_and_Hrvoje_Jasak '''Introductory course'''] - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.
−
 
−
* [https://wiki.openfoam.com/Basic_introduction_by_Hakan_Nilsson '''Basic Introduction to OpenFOAM'''] - These pdfs will give you an excellent start into CFD with OpenFOAM.
 
  
 
* [https://wiki.openfoam.com/Running_your_first_case_by_Jozsef_Nagy '''Running your first case on your own'''] - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
 
* [https://wiki.openfoam.com/Running_your_first_case_by_Jozsef_Nagy '''Running your first case on your own'''] - Here you can test your knowledge on the basics of OpenFOAM by trying to run a case on your own.
  
−
* [https://wiki.openfoam.com/First_Case_by_Bahram_Haddadi '''Discretization – Part 2'''] - Use the scalarTransportFoam solver, do simulate the movement of a circular scalar spot region at the middle of a 100 × 100 cell mesh (10 m × 10 m), then move it to the right, to the top and diagonally.
 
  
−
* [https://wiki.openfoam.com/Hagen_Poiseuille_by_Joel_Guerrero '''Hagen Poiseuille flow'''] - Here you will find a basic tutorial on the Hagen Poiseuille flow.
+
Check the [https://wiki.openfoam.com/Basics_archive Archive] section for more (however not fully up to date) basic tutorials.
  
 
=Further reading=
 
=Further reading=

Revision as of 11:39, 29 November 2022

These tutorials are perfect for beginners. You can slowly take your first steps in OpenFOAM.

Go back to Collection by topic.

Basics

  • Elbow case - In this tutorial you will get a first hands-on glimpse into the workflow of CFD simulations with OpenFOAM.


  • Introductory course - In these videos you will hear a detailed introduction to OpenFOAM by Professor Hrvoje Jasak.


Check the Archive section for more (however not fully up to date) basic tutorials.

Further reading

Retrieved from "https://wiki.openfoam.com/index.php?title=Collection_of_the_basics&oldid=4089"