Difference between revisions of "Day 1"
Andy Heather (talk | contribs) (Test link) |
Jozsef Nagy (talk | contribs) |
||
Line 1: | Line 1: | ||
=Installing OpenFOAM= | =Installing OpenFOAM= | ||
+ | |||
+ | Follow the official guideline [http://www.openfoam.com here]. | ||
Follow the official guideline [http://www.openfoam.com here]. | Follow the official guideline [http://www.openfoam.com here]. |
Revision as of 11:28, 5 September 2016
Contents
Installing OpenFOAM
Follow the official guideline here.
Follow the official guideline here.
Follow the official guideline here.
Follow the official guideline here [ here].
Alternatively you can follow the video tutorial of Jozsef Nagy or the written tutorial of Joel Guerrero.
First simulation
In this tutorial you will get a first hangs-on glimpse into the workflow of CFD simulations with OpenFOAM.
Cavity tutorial
This is one of the most basics tutorials. You will revisit this example, so it is a good idea to try it out now.
OpenFOAM basics
Here you will find a video on the basics of OpenFOAM.
blockMesh 1
In this first tutorial video you will try out the OpenFOAM internal utility blockMesh in order to create a simple mesh for a simulation.
blockMesh 2
In this second tutorial video you will continue the OpenFOAM basics from above.