Difference between revisions of "Day 13"

From OpenFOAM Wiki
Jump to navigation Jump to search
Line 8: Line 8:
 
Go back to [https://wiki.openfoam.com/index.php?title=%223_weeks%22_series "3 weeks" series].
 
Go back to [https://wiki.openfoam.com/index.php?title=%223_weeks%22_series "3 weeks" series].
  
=[https://wiki.openfoam.com/Free_convection_by_Sergei_Strijhak Free convection]=
+
This section of the 3-weeks series is currently under maintanance.
 
 
=[https://wiki.openfoam.com/Conjugate_heat_transfer_by_Bruno_Santos Conjugate heat transfer]=
 
 
 
Sometimes it is important to consider the heat conduction in a solid wall to correctly model the temperature on a given wall. For that you have to do modifications in your case setup. This tutorial shows you a simple example, where a simulation is explained step-by-step. The focus is on:
 
 
 
* case setup
 
* running the simulation
 
* postprocessing
 
* file description
 
* understanding the physics
 
* boundary layer
 
* analytical solution
 
* interpreting the results
 
 
 
=[https://wiki.openfoam.com/Reacting_flow_by_Bahram_Haddadi_and_colleagues Reacting elbow]=
 
 
 
Use the reactingFoam solver, simulate combustion of CH4 and O2 in a mixing elbow.
 
 
 
* Understanding multi-species and reaction modeling in OpenFOAM
 
 
 
=[https://wiki.openfoam.com/Thermodynamic_class_by_Isabelle_Choquet ThermophysicalModels library]=
 
 
 
In this tutorial your will get an introduction into the thermophysical models in OpenFOAM. You will learn how to implement your own models. The focus is on
 
 
 
* thermophysical models
 
* implementing your own thermophysical model
 
* implementing your own transport model
 
* understanding the physics
 
  
 
=End of Day 13=
 
=End of Day 13=
  
 
We arrived at the end of Day 13. We hope, that you found the information useful and that you will come back tomorrow for even more. Until then we wish you a pleasant day.
 
We arrived at the end of Day 13. We hope, that you found the information useful and that you will come back tomorrow for even more. Until then we wish you a pleasant day.

Revision as of 08:40, 28 September 2018

On Day 13 we will focus on topics, which include thermal processes. These processes are rather common in the industry and the modeling can be rather challenging. For this we will take a look at the possibilities OpenFOAM offers and concentrate on

  • free convection
  • conjugate heat transfer
  • reaction modeling
  • thermophysical models

Go back to "3 weeks" series.

This section of the 3-weeks series is currently under maintanance.

End of Day 13

We arrived at the end of Day 13. We hope, that you found the information useful and that you will come back tomorrow for even more. Until then we wish you a pleasant day.