Difference between revisions of "Discretization by Jozsef Nagy"
Jump to navigation
Jump to search
Jozsef Nagy (talk | contribs) |
Jozsef Nagy (talk | contribs) |
||
Line 1: | Line 1: | ||
* '''contributor''': Jozsef Nagy | * '''contributor''': Jozsef Nagy | ||
* '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria | * '''affiliation''': Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria | ||
− | * '''contact''': jozsef.nagy@jku.at | + | * '''contact''': <mail address='jozsef.nagy@jku.at' description='author'>click here for email address</mail> |
* '''OpenFOAM version''': 2.3.0 | * '''OpenFOAM version''': 2.3.0 | ||
* '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) | * '''Published under''': CC BY-NC-SA license ([https://creativecommons.org/licenses creative commons licenses]) |
Revision as of 13:06, 28 September 2016
- contributor: Jozsef Nagy
- affiliation: Institute of Polymer Injection Molding and Process Automation, Johannes Kepler University Linz, Austria
- contact: click here for email address
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
Go back to Day 4.
Discretization
In this tutorial
you will get a detailed introduction into discretization. The order of magnitude of the utilized discretization is as important as your grid resolution. A detailed knowledge on the basics will help you improve your simulations results. This tutorial gives you an understanding on the theory, an introduction on the implementation as well as the application of different schemes within an OpenFOAM case. The topics covered here are:
- spatial discretization
- face interpolation
- changing schemes in OpenFOAM
- divergence schemes
- influence of discretization on the simulation results of a passive scalar
- post processing
- contributor: Bahram Haddadi, Jozsef Nagy and Christian Jordan
- affiliation: Forschungsgruppe Thermische Verfahrenstechnik & Fluiddynamische Simulation am Institut für Verfahrenstechnik der Technischen Universität Wien, Austria
- contact: click here for email address
- OpenFOAM version: 2.3.0
- Published under: CC BY-NC-SA license (creative commons licenses)
- additional acknowledgements: Clemens Gößnitzer, Vikram Natarajan, Sylvia Zibuschka, Michael Harasek
[http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Three.pdf Grid convergence]
In this [http:// www.cfd.at/downloads/2014_OFoam_Tut_Example%20Four.pdf pdf] you will find a written step-by-step walkthrough of the tutorial above.